Apparently, auto-booting of a VM on a XenServer was removed in 6.0+.
auto-booting can still be done by utilizing the command line from XenCenter.
First, one must specify the Pool as being “auto-bootable”. Next, one must specify the VM as being “auto-bootable”.
This guide shows the exact steps necessary to achieve both:
Creating Virtual Machines (VMs) is a great way to easily deploy software for testing and production purposes. For many of my projects, especially those requiring a HTTP backend, I create a VM to host said solution.
Azure is a great way to host in the cloud, but it can get quite expensive - especially if one needs a lot of VM’s for testing purposes. In addition, transferring stuff to and from the cloud requires a beefy internet connection when dealing with BigData related entities.
Recently I experimented with setting up my own HyperVisor using cheap hardware, specifically: a Intel celeron J1900 quad core with a small 128GB SSD and 8GB of ram, to host some of my VMs.
Installing VMWares VSphere Hypervisor (ESXi) was my initial thought, but I could not get the install process all the way through. Apparently, ESXi only supports a limited number of hardware configurations. Luckily, an OpenSource alternative exists call XenServer.
XenServer is, more or less, a Linux powered hyper-visor. Installing is a breeze, simply get the ISO from XenServer.org, flash an USB with the image and bootup a x64 with the virtualization technology enabled. After a few minutes of installing, XenServer is up and running and can be connected to from another PC using XenCenter management tool.
XenCenter allows one to create VMs, configure NFS, remote control a VM, take snapshots of a VM, and so on. XenCenter also allows one to create Pools of one or more XenServers (clustering=. The latter is especially awesome since it allows one to setup a centralized NFS for the virtuals disks and then deploy the VMs between the available XenServers.
I have not yet created a pool with more than one XenServer, but I want to install three of the above mentioned hardware and designate one as master and the other two as slaves. This would allow me to virtualize across three nodes, with a total of 12 CPU cores, 384 GB fast SSD and 24GB ram.
Stay tuned for the latter when I get more hardware to add to my pool.